VimeoFacebookYoutube
You are here: Miami Aerial Drones»RTF - New DJI S900

RTF - New DJI S900

This is our New Ready to Fly Package S900 with Zenmuse (NEX7, NEX5, BMPCC or GH4) + A2 + IOSD Mark II + 5.8 TX/RX Combo and includes very nice Graupner Radios. We prefer to provide a Graupner Radios for the copter on this package as the MX20 will give you full telemetry and shows the copters amperage, power consumption and voltage which is extremely important.

No need to worry about building and setting up your S900 and Zenmuse. This package takes out all the stress and guess work of building an expensive copter. All aerial photography systems are tailored to the individual customer based on budget, purpose, camera and experience.

You select the Zenmuse model you want. We then build and dial in your S900 with a Graupner or Futaba 14SG radio. Once that is completely set up, test flown and put through a stress test. We then Install your Zenmuse, and set that up on a seperate Graupner / Futaba 8FG. That is then calibrated, and we configure all your switches. We then take it for a couple more test flights and dial in the gains. When you receive your S900, you will have the confidence that it is set up correctly, and that it has already been flown fully configured.

The complete package includes:

  • S900 Hexacopter Frame, Motors and Motor Controllers
  • Retractable Landing Gear
  • DJI Carbon Fiber Props
  • Graupner MX20 and MZ16 or Futaba alternativ
  • DJI Wookong M or A2 Autopilot
  • IOSD Mark II & DJI Datalink
  • MaxAmps dual 6,000mah High Density Lipos
  • Zenmuse Z15 Gimbal (select from Nex, Panasonic or BMPCC)
  • DJI Video Downlink
  • Custom Ground Station Options as per request

alternativ items for operation if needed

  • Hyperion EOS 0720i DUO3 2x 500W Charger
  • 50 AMP 10-25V 1200 Efuel WATT DC POWER SUPPLY WITH DIGITAL DISPLAY
  • DJI Lightbridge 2.4G Full HD Video Downlink with OSD and Control
  • Lilliput 7″ 664/o/p LED Camera-top Monitor with Hdmi/in&out+av (Gimbal)
  • Pearl 7 inch all in one FPV monitor (Pilot)
  • Circular Wireless HELIAXIAL58 Helical Axial Mode 5.8 GHz FPV Antenna
  • 5.8GHz Circular Polarized Antenna with Cover for Receiver (SMA) (RHCP)

The package includes everything required to operate, the items above are listed to give an overview of the core components. Each system is hand built, with 100% dedication to the project and customer. No corners are cut. The on-board systems are expertly setup, configured and balanced in order to provide a TRUE ready to fly system. Before being released every multicopter is put through its paces via a grueling endurance test, in excess of 20 full flights totaling some 4 hours in the air. This ensures you can concentrate on getting the perfect shot, without the worry of the aircraft’s integrity and air worthiness.

DJI Spreading Wings S900

The DJI Spreading Wings S900 has been designed for professional aerial photographers and cinematographers. The lightweight, compact design of the DJI Spreading Wings S900 makes it very easy to transport anywhere.
The DJI S900 is equipped with the most advanced motors and electronic speed controllers, the frame is constructed from carbon fiber. The S900 has a brand new power distribution system which gives the power, strength and stability needed to create amazing footage. The use of carbon fiber in the frame, landing legs and arms sees the S900 weight at 3.3 Kg’s with a maximum take-off weight of 8.2 Kg’. The DJI S900 system has been tested at 6.8 Kg take-off weight and achieved a hover time of 18 minutes when used with a 12000 mAh battery hovering at 2 meters on a calm day. Ok, we got little less than 13min so DJI always over estimates.

The Retractable landing gear and the low gimbal mounting bracket gives an extremely wide range of possible shooting angles and camera movement. As seen on the DJI S1000 Octocopter Premium the S900 Zenmuse gimbal mount bracket is separated from the main frame by a specially designed damper system. This significantly reduces the high-frequency vibrations transmitted to the gimbal which makes your shots clearer and sharper.
The upper central board can be easily removed, allowing for easy access to install your flight controller, IMU and other systems like the iOSD Mark II and the DJI Lightbridge. The DJI Spreading Wings S900 system is fully compatible with the DJI Wookong M and DJI A2 Fight controllers.

The DJI Spreading Wings has an innovative arm design, each arm is designed with an 8 degree inversion with a 3 degree inclination; this makes the S900 more stable when rolling and pitching, yet more flexible when rotating. The 40 Amp electronic speed controllers (ESC), deliver the fastest response times available, each arm has the ESC built in to each arm. The combination of the ESCs with its 4114 pro motors and 1552 folding propellers deliver 2.5 kg’s of thrust with the high performance 1552 folding propellers. The V-type mixer design used with the S900 has a maximum thrust of 15.0 Kg’s.

Motor and ESC adopts the single wire stator design, offering improved heat dissipation, better performance which gives a very reliable system. The use of the AS150 spark-proof plug prevents short circuits and an easily way plug in your power supply.

A2 Multi-rotor Stabilization Controller

DJI A2 multi-rotor stabilization controller is a complete flight control system for various multi-rotor platforms for commercial and industrial AP applications. It opens an unprecedented era of precise positioning and perfect flight control in harsh environments for flight control systems.

Its high performance antenna, low noise anti-interference front-end RF design, accurate position and speed calculating comprehensive technological breakthroughs, all these make the positioning performance of the GPS Pro near perfection; With higher accuracy performance, larger measuring range, and a unique damping design and calibration algorithm, the IMU is able to provide stable output even in high vibration and large movement environments. The built-in receiver system directly supports the popular transmitters, and it also supports a variety of external receivers. Combined with abundant output interfaces, flexible configuration, it makes the flight controller competent for complex control and airborne equipment operation; the new dual CAN-Bus design greatly improves the data throughput and stability of the system.

Based on the technology and design philosophy of DJI’s Ace series of high-performance controllers, the A2 offers you a brand new flight experience. The A2 adopts a full metal case design and utilizes high quality components precisely calibrated with temperature compensation in all gyros and sensors, industry renowned flight algorithm in flight control and UAV field.

Leave your comment

Your Name: (required)

E-Mail: (required)

Website: (not required)

Message: (required)

Send comment